OME 0.4″ Rear Lift Lean Correcting Trim Spacer for Toyota FJ Cruiser and 4Runner 2003-2024

5 reviews for OME 0.4″ Rear Lift Lean Correcting Trim Spacer for Toyota FJ Cruiser and 4Runner 2003-2024

1. Rated 5 out of 5

   Todd – October 12, 2014

   The OME Rear trim spacers worked like a charm. I used them to get a .75 of inch lift in the rear with out springs. I doubled up on the spacers to get .75 of an inch. Looks awesome with Bilstein struts set at 1.75.

2. Rated 5 out of 5

   ovidioglopez – August 16, 2018

   So far its good. It leveled out the truck good enough that I did not even have to install the front spacer. The truck sits within relatively level all around now. It is worth mentioning the front springs and struts are new as well as the rear springs and struts.

3. Rated 1 out of 5

   jef – July 26, 2022

   All FJ lean is front left. If you have rear sag w new shock and springs, something else is wrong.

4. Rated 5 out of 5

   Ray West – July 16, 2023

   I Bought the Bilstein 5100. So Far Great, just got a slight lean forward…Can you use these on the front of a 2018 4Runner TRD PRO?

5. Rated 5 out of 5

   Adi W. – January 2, 2025

   This is perfect for adding a little lift to the back end of your 4runner. It doesn’t explicitly say it, but you can stack two of these together if needed for a very easy 20mm lift if you need to fix a small rake. I wouldn’t do more than that, even though it will *probably* be ok. Stacking two of these will still keep the spacers inside the *pocket* where the coil spring is perched, so it will stay in place.