Bilstein 5100 0-2″ Lift Assembled Front Coilovers with OE Replacement Coils, 1-1.5″ Rear Lift Shocks for 1995-2004 Toyota Tacoma

Description
Bilstein 5100 0-2″ Lift Assembled Front Coilovers with OE Replacement Coils, 1-1.5″ Rear Lift Shocks for 1995-2004 Toyota Tacoma

Bilstein 5100 0-2″ Lift Assembled Front Coilovers with OE Replacement Springs and 1-1.5″ Rear Lift Shocks for 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Toyota Tacoma

Part: 5100BIL95TS

Bilstein 5100 Shocks Assembled with Moog Springs. These are stock height replacement coilovers with option to adjust the lift.

Bilstein Shocks: 24-249928

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE Replacement springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting.  Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

Springs:

• Designed To Lower Stresses For Longer Service Life
• Worn Or Sagging Coil Springs Can Cause Premature Tire Wear Due To Vehicle Misalignment
• 100 Percent Load Tested
• Easy To Install
• Limited 1 Year Warranty

Rear Shocks:

Part: 33-247724_33-247717

Rear Shocks are advertised for 1-1.5″ of lift, but we noticed that they will still work fine with 0″ or stock height

Part Number: 33-247724
Position: Rear Left
Collapsed Length (IN)13.62
Extended Length (IN)21.26

Part Number: 33-247717
Position: Rear Right
Collapsed Length (IN)14.07
Extended Length (IN)22.09

Note: Due to the increased collapsed length of Bilstein Shock Absorbers 33-247724 and 33-247717, a 1-1.5” lift (block or add a leaf) is required.

Additional information