Front OME 2883, 2884, 2885, 2886 Coils 2005-2015 Toyota Tacoma

SKU: OME-T
(7 customer reviews)
Front OME Lift Coils
Front OME Lift Coils

Description
Front OME 2883, 2884, 2885, 2886 Coils 2005-2015 Toyota Tacoma

Front OME 883, 884, 885, 886 Coils for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Toyota Tacoma

ARB Part numbers: 2883, 2884, 2885

Select coils from options- All coils are sold in pairs

OME-2883 Front Coil Springs: Used alone as leveling coils (approx. 1 1/2″) for 2005-2015 Toyota Tacoma

The coils below are for 2005+ Tacoma

Front coils: Choose from options

  • OME-2884 coils for std and x cab models
  • OME-2885 coils for D cab and additional weight.
  • OME-2886 coils for 200+ lbs front weight from aftermarket bumper or winch

 

We recommend Old Man Emu 90000 shocks (sold separately) to be used with OME coils. 2885 and 2886 coils will NOT work on stock shocks

NOTE: Does not fit 5 wheel lug Tacoma’s. Please check your application before ordering.

7 reviews for Front OME 2883, 2884, 2885, 2886 Coils 2005-2015 Toyota Tacoma

  1. peter –

    Great product. My last set of OME coils lasted more than 50,000 miles until I sold the truck. I bought the 886 springs to upgrade my 885x on my tacoma after adding a winch bumper. My only recommendation is not to use the sh*tty rental spring compressor, but youtube how to replace springs by dropping the lower control arm with a floor jack.

  2. blake teeter –

    I put these on the Bilstein 5100’s on my Tacoma & they are noticeably stiffer (for the better). I am more than happy with the result over the stock yellow bilsteins. Install with a floor jack wasn’t exactly fun due to the 600lbs springs but overall again well worth it.
    As mentioned, I do believe I got 2.5″ lift and I’ve got 1 battery on each corner up front & a bull bar. Aewsome customer service for weight reference. Will be buying more from these guys.

  3. Mike –

    I paired these with Bilstein 5100s when I lifted my GX470. I saved a lot of cheddar going with this set up over some of the more expensive suspensions. The 883s are stronger than I thought they would be and perform well.

  4. Robert Webster –

    I put an iron cross bumper with grill hairs and winch on my 2012 tacoma pre-runner 4X2. I bought Bilstien 5100 struts to put on the front but haven’t installed them yet. Which coil springs should I get to go with the struts.

  5. Daniel Houle –

    Tacoma2009 dclb replace my ready lift spacer with ome884 and bilstein 5100. Ride better than new.

  6. James Houda –

    Looks like the answer for the Shrockworks bumper. I actually ordered 2 sets by mistake and they made it right the next day!! Will order from them again.

  7. Jack B. –

    Purchased some Bilstein 5100’s and after hours of research I decided to go with coils instead of preloading my stock coils with the 3rd setting. I ended up going with OME 884x’s (yes all of them are the X series even though it doesn’t say). I absolutely love them! No nose dive with breaking and the truck feels more planted when cornering. You truly notice the performance increase when you hit bumps vs stock. I have a 2015 TRD OR Access cab with the V6 4×4 for reference. I achieved about 2.25 inches of lift which is exactly what I wanted to fit 265 70 r17’s without any issues or rubbing. I wanted to keep it as close to 2 inch’s as possible to fit the tires plus I was able to achieve an alignment without any issues or the need for upgraded UCA’s. I still had to take off the front mud flaps but they always either broke off or got caught when overlanding. I did purchase the 1/2 inch spacer to correct the driver’s side lean and she looks very level. Shipping was extremely fast!

Add a review

Your email address will not be published. Required fields are marked *

ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

Related products

Price: $215.05

In Stock
Share (1)
Total: 0 Total: 0 Total: 0 Total: 1