Bilstein 5100 0-2.5″ Lift Front Adjustable Shocks for 2000-2006 Toyota Tundra

SKU: B-6929
(6 customer reviews)
Sale!

Description
Bilstein 5100 0-2.5″ Lift Front Adjustable Shocks for 2000-2006 Toyota Tundra

Bilstein Front Height Adjustable 5100 shocks for 2000, 2001, 2002, 2003, 2004, 2005, 2006 Toyota Tundra

Part: 24-261425 (old: 24-188265)

Includes: 2 Shocks 24-261425 (old: 24-188265)

Front 5100 Height adjustable front shocks provide various lift:

 width=
Typical Front Lift Height**
circlip
location #
crew cab
4×4
access cab
4×4
crew cab
4×2
access cab
4×2
1 stock stock stock stock
2 0.53″ 0.53″ 0.63″ 0.66″
3 1.07″ 1.05″ 1.25″ 1.33″
4 1.6″ Do NOT use 1.88″ 2.00″
5 Do NOT use Do NOT use 2.50″ 2.65″

On Crew Cab 4×4 models, do not use circlip location #5.
On Access Cab 4×4 models, do not use circlip locations #4 or #5.

** Ride heights indicated are typical. Actual ride height is influenced by which factory suspension the vehicle is equipped with and its condition; optional equipment and accessories on your vehicle, and other vehicle modifications such as replacement coil springs, wheel and tire combinations, etc. Modifying/lifting the suspension to your vehicle may raise its center of gravity and may make it more susceptible to loss of control and/or rollover, which may result in death or serious injury. We strongly recommend that you offset the loss of rollover resistance as much as possible by increasing tire track width, and that you equip the vehicle with a functional roll bar and cage system. Wear seat belts and shoulder harnesses at all times, and avoid situations where a side rollover may occur.

Designed for use with stock coil springs

Not recommended for use with any other front lift products

Priced and sold in pairs
Includes 2 Shocks

Other products you may be interested in:

6 reviews for Bilstein 5100 0-2.5″ Lift Front Adjustable Shocks for 2000-2006 Toyota Tundra

  1. Fabian regulsky

    Always liked the product fitment is great

  2. Caleb

    I have 2000 Tundra 4×4 access cab. The front-end was leveled with 1.5″ spacer on 4600 series Bilsteins struts. The rear has a 2″ lift block. It sat dead level, 39″ front and rear from ground to fender center.
    I just replaced all suspension with the 5100 series adjustable struts and rear shocks. The mechanic set the front strut clips to #2. The truck now sits approx 1.75″ lower in the front (37.5″ ground to fender) . The rear raised .5″ (39.25″ ground to fender). I see in the install instructions I can go to #3 clip setting but I feel like even with this I will not gain the almost 2″ difference. What are my risks of going to #4 clip? What is the best to get my truck back to level with this setup? Thanks for any help and advice! Caleb

  3. Dustin Mahoy

    Went in just as it should, great ride quality.

  4. Benjamin Boscaccy

    I wish I could give a review for how the shocks ride, but a crucial part of the kit was left out of my shipment. I have contacted customer service and all they did was pass me off to the manufacturer, who hasn’t reach out to me. My truck is on jackstands and Bilstein lifts is not doing right and sending me what was missing from their shipment.

  5. joshua remijio

    Really fast delivery, packaging was just fine. Bilstein 5100 front shocks, placed on the highest setting, truck rides like a new truck now. 2006 Toyota Tundra DC 2wd. Stock shocks were the stock 4600 (original). Very happy with purchase.

  6. Rafael Munguia

    They make my truck ride really nice. This was a replacement for a 15 year old set of Bilstein. Makes my 2004 Tundra new

Add a review

Your email address will not be published. Required fields are marked *

Original price was: $314.00.Current price is: $281.78.

In stock

In stock